Tips

Create a work environment where you're comfortable and have everything within reach.

Remember, you should always do a test on a disposable surface with similar characteristics to the one you're going to stamp. This will help you practise the pressure to apply and the amount of ink the roller included in our printing kits needs.

It's a very comfortable and quick stamping. The quality of the paper/cardboard is key to a good result.

We recommend drying between 30 minutes and 24 hours, depending on how porous and absorbent the material is.

The stamp feels great on wood, especially if it has no treatment.

If it has varnish, we can sand it lightly, stamp, and then apply a coat of varnish again to protect it.

On untreated wood, a drying time between 30 minutes and 24 hours is recommended, depending on how porous and absorbent the material is.

For wall application, the surface should be smooth and matte.

If the stamp is large, it's important to try to apply pressure evenly across the whole stamp.

The recommended drying time is 48 hours.

It's essential to avoid folds before stamping; for this we offer our t-shirt tensioner. We recommend adding a new drop of ink onto the acetate for each print. Press and hold down for 3 or 4 seconds, then lift the stamp gently. We recommend using Speedball ink, with a drying time of 48 hours, and not washing for 7 days.

Washing tips: Wash at low temperature and don't tumble dry.

The best way to extend the life of our BigStamping printing kits is to store them in a place without sudden temperature changes and protect them from light, to prevent the stamp material from deteriorating.

To clean it, use a damp sponge; we don't recommend putting the stamp under the tap.